Model
Name
Check Valve
SC-200
-PN 16
1/4" ~3" DN8~DN80
Product Picture
FeaturesSwing Type Check Valves |
|---|
1. SWING TYPE |
Notifications| Dimensions |
| Please refer to the Dimensions section. |
 |
| Measurement Units |
| 1. All lengths are measured in millimeter and inch. 2. All weights are measured in kilograms and pounds |
| About Product |
| 1. Shipping and Tax are not included in pricing. 2. All products supplied by Modentic are under products liability insurance. 3. Valvebus.com reserves the rights to change any details without prior notice. |
| About VALVEBUS |
| VALVEBUS.com reserves the right to change any details without prior notice. |
| Back to Top |
 |
Specifications| MODEL | SC-200 |
| PRODUCT TYPE | Swing Type Check Valves |
| OPERATION | Swing Type |
| PRESSURE | PN 16 |
| CONNECTION | Swing Type |
| PORT | - |
| BODY Material | 1.4408 / EN1503-1 |
| CAP / BONNET Material | 1.4408 / EN1503-1 |
| STEM Material | - |
| DISC Material | ASTM A351 Gr.CF8M |
| SEAT Material | PTFE |
| SPRING Material | SS316 |
| PLATE Material | ASTM A351 Gr.CF8M |
| SWING TYPE |
| In the open position of a swing type check valve, the flow of fluid forces the hinged disk up and allows free flow through the valve. Flow in the opposite direction with the aid of gravity, forces the hinged disk to close the passage and blocks the flow. |
| SOLID WEDGE |
| The solid wedge gate valve shown is the most commonly used disk because of its simplicity and strength. A valve with this type of wedge may be installed in any position and it is suitable for almost all fluids. It is practical for turbulent flow. |
| SC-200 |
| STANDARD COMPLIANCE • Body Wall Thickness : EN 12516-1/3 • Body Materail : EN 10213-4 • Threaded End : BS21/BSPT/ISO228-1/DIN2999/ISO7-1 • Pressure Testing : EN12266 TEMPERATURE RANGE • -20° to 180°C WORKING PRESSURE • 0.15Kgf/cm2 |
| Swing Type |
| In the open position of a swing type check valve, the flow of fluid forces the hinged disk up and allows free flow through the valve. Flow in the opposite direction with the aid of gravity, forces the hinged disk to close the passage and blocks the flow. |
Dimension + Weight| SIZE NPS |
E mm |
H mm |
L mm |
WEIGHT kgs |
| DN8 | - | 42.0 | 65.0 | - |
| DN10 | - | 42.0 | 65.0 | - |
| DN15 | - | 42.0 | 65.0 | - |
| DN20 | - | 51.0 | 80.0 | - |
| DN25 | - | 60.0 | 90.0 | - |
| DN32 | - | 67.0 | 105.0 | - |
| DN40 | - | 75.0 | 120.0 | - |
| DN50 | - | 81.0 | 140.0 | - |
| DN65 | - | 93.0 | 180.0 | - |
| DN80 | - | 104.0 | 200.0 | - |
| SIZE Inch |
E Inch |
H Inch |
L Inch |
WEIGHT lbs |
| 1/4" | - | 1.7 | 2.6 | - |
| 3/8" | - | 1.7 | 2.6 | - |
| 1/2" | - | 1.7 | 2.6 | - |
| 3/4" | - | 2.0 | 3.1 | - |
| 1" | - | 2.4 | 3.5 | - |
| 1-1/4" | - | 2.6 | 4.1 | - |
| 1-1/2" | - | 3.0 | 4.7 | - |
| 2" | - | 3.2 | 5.5 | - |
| 2-1/2" | - | 3.7 | 7.1 | - |
| 3" | - | 4.1 | 7.9 | - |
